Technical specification of HR-1026:

Feature of HR-1026 Low Power Wireless Transceiver Data Module:
1.Power and receiving sensitivity
The transmission power is<500Mw, Receiving sensitivity:          -123dbm(1200bps),-118dbm(9600bps)
Transmission current<300mA, Receiving current<25mA, sleeping current <20uA.
2. Modulation mode and Frequency
Modulation mode: GFSK, Frequency: 433MHz. Also capable of 450/470/868/915MHz.
3. High anti- interference and low BER(Bit error Rate)
Based on the GFSK modulation mode, the high- efficiency forward error correction channel encoding technology is used to enhance data's resistance to both burst interference and random interference and the actual bit error rate of 10-5 ~ 10-6 can be achieved when channel bit error rate is 10-2.
4. Long transmission distance
Within the range of visibility, the reliable distance is (BER=10-5/9600bps)>2Km, (BER=10-5/1200bps)>3Km Standard antenna is 10cm,when antenna is 1.5m above ground in open area

5. Transparent data interface

Transparent data interface is offered to suit any standard or nonstandard user protocol. Any false data generated in the air can be filtrated automatically (What has been received is exactly what has been transmitted). The change time between receiving and sending is <10ms.
6. Multi- channel
The standard HR-1026 configuration provides 8 channels, if the user needs, it can be extended to 16/32 interface, meeting the multiple communication combination mode of the user.
7. Large data buffer zone

Interface baud rate is 1200/2400/4800/9600bps with format of 8N1/8E1 and user can define it by itself, It can transmit unlimited data when Interface baud rate is not bigger than air effective baud rate band.
8. Intelligent data control and the user doesn't need to prepare excessive programs
Even for semi duplex communication, the user doesn't need to prepare excessive programs, only receiving/transmitting the data from the interface. HR-1026 will complete the other operations automatically, such as transmission/receiving conversion in the air, control, etc.

9. 2 ports with three connection methods

HR-1026 transceivers provide 2 ports with three connection, ports: a UART interface of TTL level, a non-standard RS-232 port and a non-standard RS-485 port, which both are defined by user software (define it just by plugging out and in one short circuit device and then power on)

10. Three kinds of interface modes (TTL, RS-232, RS-485)

RS-232, RS-485 interface diversion chip, DB9 standard interface connector and special power connector are used.
11. Watchdog monitor
Watchdog monitors the inner function, so it can change the traditional product structure and also improve the reliability of our modules.

Contact: Mr Jet Zhang

Tel: 86 755 81782516

Mobile: 86 ( 0 ) 158 138 56667

Fax: 86 755 23007123 

E-mail: sales@ohglrf.com 

MSN: jetzhangcn@hotmail.com

Skype: jet20071204

Company: Oriental Huaray Group Limited

Add: Floor 2, Building A, Huaxia Industrial Park, Guangming Road, Shiyan BaoAn district, Shenzhen 518108, China  

Website: www.ohglrf.com

www.rf-transceiver-module.com

Key words: Wireless Data Transmission, Radio Modems, RF modules, rf transceiver modules, Wireless Module,Wireless Data Transceiver Module, RF Module, RF Data Transceiver Module, Radio Module, Radio Modem, VHF Module, ZigBee Module, GSM/GPRS Module, GSM GPRS+GPS Module, VHF and UHF wireless, OEM and ODM modules, RF transmitter, RF receiver, Wireless Video, long range Radio Modems, Radio Telemetry, Wireless CCTV, PTZ, wireless remote control, Modbus, RS485 profibus, audio modules, I/O modules, ON-OFF modules, analog acquisition modules, RS232 connector/port, RF module 433MHz, GSM/GPRS, Embedded wireless module, Telemetry, monitoring, low cost, Public Utilities, Transport, Traffic, Parking, Industrial Automation, Security, Process Control, Analog Acquisition, Remote Control, Flow Control, Level Monitoring, Alarms, Access Control.